Hi,

I got response from ADI support:

The Graphic EQ example is not supported in VisualDSP++ 3.5 even although
the example is present. It was never removed when this example was
dropped in VisualDSP++ 3.5. Our latest 4.0 version has been updated to
reflect this and no longer contains the Graphic EQ example.

Regards,

-- 
------------------------------
Jaime Andr&#4294967295;s Aranguren Cardona
jaac@sanjaac.com
SanJaaC Electronics
Soluciones en DSP
www.sanjaac.com


"Jaime Andr&#4294967295;s Aranguren Cardona" <jaac@nospam.sanjaac.com> escribi&#4294967295; en el 
mensaje news:1121026077.32f9c27991c7ff13b90d78cd8c2ee23d@teranews...
> Hello guys,
>
> I want to know if any of you has been able to run the SISD Graphic EQ demo 
> which is included with VisualDSP++ 3.5 (and former versions of the tools).
>
> This is a nice demo, which runs a 10 band Graphoic Equalizer on the 
> ADDS-21161N-EZLITE, with a nice interface on which the user, from within 
> an EzKit session controls the sliders of the EQ.
>
> I remember I could run it on VisualDSP++ 2.0. It is included in 
> VisualDSP++ 3.5 too, but the "Tools->21161 Ez-Kit" entry in the menu does 
> not appear, so I can not control the EQ. It seems like wither the ActiveX 
> control is not included, or is not properly registered, or something like 
> that.
>
> All of your comments are of much help.
>
> Regards,
>
> -- 
> ------------------------------
> Jaime Andr&#4294967295;s Aranguren Cardona
> jaac@sanjaac.com
> SanJaaC Electronics
> Soluciones en DSP
> www.sanjaac.com

Hello guys,

I want to know if any of you has been able to run the SISD Graphic EQ demo 
which is included with VisualDSP++ 3.5 (and former versions of the tools).

This is a nice demo, which runs a 10 band Graphoic Equalizer on the 
ADDS-21161N-EZLITE, with a nice interface on which the user, from within an 
EzKit session controls the sliders of the EQ.

I remember I could run it on VisualDSP++ 2.0. It is included in VisualDSP++ 
3.5 too, but the "Tools->21161 Ez-Kit" entry in the menu does not appear, so 
I can not control the EQ. It seems like wither the ActiveX control is not 
included, or is not properly registered, or something like that.

All of your comments are of much help.

Regards,

-- 
------------------------------
Jaime Andr&#4294967295;s Aranguren Cardona
jaac@sanjaac.com
SanJaaC Electronics
Soluciones en DSP
www.sanjaac.com