Hello addict,
The answer is yes - my thoughts would be...
You could use "store bought [or scrounged] parts" and some software
with the first two implementations.
1. ethernet - connect each board to a 100M switch on their own private
network
2. PCI - use a PC [or a PCI backplane with one SBC to perform the PCI
enumeration].
You could also design a daughtercard that communicated with 4 or 8 DM642s
via shared memory, FIFOs, or multiported mem.
You should really be able process some serious video or ???
mikedunn
c64addict <c...@yahoo.com> wrote:
hi all,
Is it possible for a few DM642 to
be stacked together to form a multiprocessor setup?
Thanks.
_____________________________________ Note: If you do a simple
"reply" with your email client, only the author of this message will receive
your answer. You need to do a "reply all" if you want your answer to be
distributed to the entire group.
_____________________________________ About this discussion group:
To Join: Send an email to c...@yahoogroups.com
To Post: Send
an email to c...@yahoogroups.com
To Leave: Send an email to
c...@yahoogroups.com
Archives:
http://www.yahoogroups.com/group/c6x
Other Groups:
http://www.dsprelated.com
Yahoo! Groups Links
<*> To
visit your group on the web, go to: http://groups.yahoo.com/group/c6x/
<*> To
unsubscribe from this group, send an email to: c...@yahoogroups.com
<*
|