The D/A connector is J26, connections are as follows: D/A0 = J26-1 D/A1 = J26-3 D/A2 = J26-5 D/A3 = J26-7 J26 pins 2, 4, 6, and 8 are connected to ground. Regards, Art Johnson Senior Systems Analyst PMC Prime Mover Controls Inc. 3600 Gilmore Way Burnaby, B.C., Canada V5G 4R8 Phone: 604 433-4644 FAX: 604 433-5570 Email: http://www.pmc-controls.com -----Original Message----- From: swaroop [mailto:] Sent: Thursday, September 19, 2002 2:30 AM To: Subject: [motoroladsp] about DSP56F807 hi Can any one give the description of DAC pins on the DSP56807EVM board........... Iam writing on channels A and D using the SDKs DAC driver...which pins I must use to see the output. thanks in advance.... swaroop _____________________________________ Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. _____________________________________ About this discussion group: To Join: To Post: To Leave: Archives: http://www.yahoogroups.com/group/motoroladsp More Groups: http://www.dsprelated.com/groups.php3 ">http://docs.yahoo.com/info/terms/ |