Hi,
I am not sure about your
problem. However, how are you writing. If you are using FILE I/O, try
this.
FILE*
fptr; /* This is your file pointer */
fptr->flags |=
0x4;
This should
help.
With Warm Regards,
Ganesh
|
Hi,
I am not sure about your
problem. However, how are you writing. If you are using FILE I/O, try
this.
FILE*
fptr; /* This is your file pointer */
fptr->flags |=
0x4;
This should
help.
With Warm Regards,
Ganesh
|
Hi , This is with regard to a problem that we are facing with our board , TMS320C6416 , version E. When interfaced with a peripheral , BU 61580, we are able to view the CE pulses during subsequent reads.But , during the write operation , the CE pulses occurr only when Nops are introduced after every write.Without the delay , the CE goes low and remains low during subsequent writes. Please send us a solution at the earliest Thanks and Best regards, Ramya |
|