Yes these
are the relevant questions to
ask and answer. If you do not need hard real-time,
If it is not
hard real-time, then you
could get by with a fast Pentium class CPU. It is important
to consider
all the processing
requirements of your application, what is it you are trying to
achieve, and
then pick a processing
solution based on that.
Regds
JS
-----Original
Message-----
From: Mike Dunn
[mailto:m...@sbcglobal.net]
Sent: Friday, November 12, 2004
10:53 PM
To: yangmeng0618;
c...@yahoogroups.com
Subject: Re: [c6x] How to transfer
the image data into the TMS320C6713 board? By USB?
Unfortunately
the 6713 DSK has no high speed
I/O. You could perhaps use the DSK to 'finish your work', if you
could
get the images to the board.
The USB
connection is only routed to the JTAG port and
is not sufficient to provide the bandwidth needed for realtime processing of
images.
Some questions
come to my mind...
Do you need to
process the images in realtime??
What type of
processing do you need to peform on the
images??
A DM642 EVM
would probably be a good choice for your
task.
mikedunn
yangmeng0618
<y...@yahoo.com> wrote:
We want to use a DSP to process quickly the digital images. The
images have been grabbed into PC from a CCD camera of 3k x 2k pixels
at 18 frames per second.
Could the TMS320C6713 DSP Starter Kit finish our work?
How to transfer the image data into the TMS320C6713 board? By USB?
Thanks.
_____________________________________
Note: If you do a simple "reply" with your email client, only the
author of this message will receive your answer. You need to do a "reply
all" if you want your answer to be distributed to the entire group.
_____________________________________
About this discussion group:
To Join: Send an email to c...@yahoogroups.com
To Post: Send an email to c...@yahoogroups.com
To Leave: Send an email to c...@yahoogroups.com
Archives: http://www.yahoogroups.com/group/c6x
Other Groups: http://www.dsprelated.com
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/c6x/
<*> To unsubscribe from this group, send an email to:
c...@yahoogroups.com
<*
_____________________________________
Note: If you do a simple "reply" with
your email client, only the author of this message will receive your
answer. You need to do a "reply all" if you want your answer to
be distributed to the entire group.
_____________________________________
About this discussion group:
To Join: Send an email to
c...@yahoogroups.com
To Post: Send an email to
c...@yahoogroups.com
To Leave: Send an email to
c...@yahoogroups.com
Archives:
http://www.yahoogroups.com/group/c6x
Other Groups:
http://www.dsprelated.com