|
Tumm, Did you have a look at TMS320C6000 McBSP Interface to an ST-BUS Device at http://focus.ti.com/docs/apps/catalog/resources/appnoteabstract.jhtml?abstractNa\ me=spra511b > I have a problem for initialize McBSP to interface with ST-BUS(4 > channels); that is time slot miss-align, two slot are shifted. how did you confirm this. Where did you see the delay?? just on the DX pin of mcbsp?? Tarang > > My McBSP is serviced by EDMA and I've verified that EDMA transfer from > DRR is correct but transfer to DXR makes this problem. I've been solving > this problem but it still not work correctly. Anyone who have this > experience pls help me . > > Thank you in advance > > Tumm > > _____________________________________ > Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://www.yahoogroups.com/group/c6x > > Other Groups: http://www.dsprelated.com > > Yahoo! Groups Links |