Hi Kyle,
I think it is unusual to run DSP/BIOS in a low flash/RAM configuration like
F28016. It is tough to find room for both BIOS and your app. Might I suggest our
VisSim/ECD which has very low overhead and provides the functionality of a thin
RTOS by setting up your main timer driven function and allowing low priority
tasks to run at various rates.
We have a customer, www.electricmotionsystems.com, who has implemented their
space vector PMSM controller with RS485 packet I/O for command and control, I2C
task for eeprom read/write, under bus voltage detection, over-temp detection,
cruise control, regenerative braking etc. on a F2801 100% in our VisSim
environment. Final footprint was 10K flash/4K RAM.
Regarding F28235 driver, we had to download several CCSv3.3 service packs to get
my F28335 driver. It was not on the CD that came with the development board.
Check your on-line update status.
Good luck,
Jim