Nir,
I am not sure what the problem is - if the data is in the buffer CCS
'should' read it. The info below may help to change the symptom
or give a clue.
You are calling LOG_printf every 30 secs - do you log a single entry at
this time?? [ie, If the log fails to update after an hour, there would
only be 120 entries logged]
Have you slowed down the host refresh rate??
Do some of the TI examples run and update continuously?? [like the volume4
tutorial]
Do you have any "stdio printf's" in your code?? [the answer should be
no]
Which c6x processor and version of CCS are you using??
mikedunn
Nir Drang <n...@scopus.net>
wrote:
Hi Mike,
yeah i do set up for circular.
when i halt the processor i can see the LOG_printfs that i
couldn't see in runtime.
again IDL loop is called.
Nir.
Hello Nir,
Your problem may not be this easy, but...
Are you set up for a circular buffer?? If your buffer is 'fixed',
logging will terminate when it is full.
mikedunn
Nir Drang <n...@scopus.net>
wrote:
Hi,
maybe someone can help me on this
one.
i call the LOG_printf every ~30ms
.
all works fine , after a while (could
be even 1 hour) i can't see any more
LOG_printf in the RTA Msg log
panel.
i placed a breakpoint in the IDL
function and it is running.
any explenation?
Thanks,
Nir.
_____________________________________ Note: If you do a simple
"reply" with your email client, only the author of this message will receive
your answer. You need to do a "reply all" if you want your answer to be
distributed to the entire group.
_____________________________________ About this discussion group:
To Join: Send an email to c...@yahoogroups.com
To
Post: Send an email to c...@yahoogroups.com
To Leave: Send an
email to c...@yahoogroups.com
Archives:
http://www.yahoogroups.com/group/c6x
Other Groups:
http://www.dsprelated.com
_____________________________________ Note: If you do a simple
"reply" with your email client, only the author of this message will receive
your answer. You need to do
a "reply all" if you want your answer to be distributed to the entire group.
_____________________________________ About this discussion
group:
To Join: Send an email to c...@yahoogroups.com
To Post: Send an email to c...@yahoogroups.com
To Leave: Send
an email to c...@yahoogroups.com
Archives:
http://www.yahoogroups.com/group/c6x
Other Groups:
http://www.dsprelated.com
_____________________________________ Note: If you do a simple
"reply" with your email client, only the author of this message will receive
your answer. You need to do a "reply all" if you want your answer to be
distributed to the entire group.
_____________________________________ About this discussion group:
To Join: Send an email to c...@yahoogroups.com
To
Post: Send
an email to c...@yahoogroups.com
To Leave: Send an email to
c...@yahoogroups.com
Archives:
http://www.yahoogroups.com/group/c6x
Other Groups:
http://www.dsprelated.com
|