Reply by Andreas Falter●December 15, 20042004-12-15
There is also a good example for a PingPong Buffer with EDMA in
ti\examples\<target>\csl\manual_config\edma, where target is the target
you
use (dsk6416 in my case). This was a great help for me to find my own
configuration.
Andreas
----- Original Message -----
From: "Nithin Rajagopal" <>
To: <>
Sent: Wednesday, December 15, 2004 12:03 AM
Subject: [c6x] Re: EDMA configure
> You might also want to look at TMS320C6x Peripheral Support Library
> Programmer's Reference (spru273b) to get an idea about the macros
> and functions used in programming with DMA (and other peripherals if
> u need).
>
> -Nithin
>
> --- In , "Pablo Fraile" <pablo.fraile@t...> wrote:
>>
>> Read the TI document spra636. It include several examples on how
> to use EDMA
>> in different scenarios.
>>
>> -----Mensaje original-----
>> De: mayank agarwal [mailto:may_ank77@y...]
>> Enviado el: martes, 14 de diciembre de 2004 12:15
>> Para:
>> Asunto: [c6x] EDMA configure
>>
>>
>>
>>
>> Can anyone guide me how to configure EDMA to transfer
>> data from one location to another.
>> Thanks,
>> Mayank Agarwal
>>
>> __________________________________________________
>>
>>
>>
>>
>>
>>
>> _____________________________________
>> Note: If you do a simple "reply" with your email client, only
the
> author of
>> this message will receive your answer. You need to do a "reply
> all" if you
>> want your answer to be distributed to the entire group.
>>
>> _____________________________________
>> About this discussion group:
>>
>> To Join: Send an email to
>>
>> To Post: Send an email to
>>
>> To Leave: Send an email to
>>
>> Archives: http://www.yahoogroups.com/group/c6x
>>
>> Other Groups: http://www.dsprelated.com
>>
>> Yahoo! Groups Links
> _____________________________________
> Note: If you do a simple "reply" with your email client, only the
author
> of this message will receive your answer. You need to do a "reply
all" if
> you want your answer to be distributed to the entire group.
>
> _____________________________________
> About this discussion group:
>
> To Join: Send an email to
>
> To Post: Send an email to
>
> To Leave: Send an email to
>
> Archives: http://www.yahoogroups.com/group/c6x
>
> Other Groups: http://www.dsprelated.com
>
> Yahoo! Groups Links
>
Reply by chets_raj●December 15, 20042004-12-15
Peripheral Support Library is currently obsolete. This has been
replaced by the CSL (Chip SUpport Library). All examples in SPRA636
use CSL APIs. Please refer to SPRU401 for details on these APIs.
Chets
--- In , "Nithin Rajagopal" <nithin.pal@g...>
wrote: >
>
> You might also want to look at TMS320C6x Peripheral Support Library
> Programmer's Reference (spru273b) to get an idea about the macros
> and functions used in programming with DMA (and other peripherals if > u need).
>
> -Nithin
>
> --- In , "Pablo Fraile" <pablo.fraile@t...> wrote: > >
> > Read the TI document spra636. It include several examples on how
> to use EDMA
> > in different scenarios.
> >
> > -----Mensaje original-----
> > De: mayank agarwal [mailto:may_ank77@y...]
> > Enviado el: martes, 14 de diciembre de 2004 12:15
> > Para:
> > Asunto: [c6x] EDMA configure
> >
> >
> >
> >
> > Can anyone guide me how to configure EDMA to transfer
> > data from one location to another.
> > Thanks,
> > Mayank Agarwal
> >
> > __________________________________________________
> >
> >
> >
> >
> >
> >
> > _____________________________________
> > Note: If you do a simple "reply" with your email client,
only the
> author of
> > this message will receive your answer. You need to do a "reply
> all" if you
> > want your answer to be distributed to the entire group.
> >
> > _____________________________________
> > About this discussion group:
> >
> > To Join: Send an email to
> >
> > To Post: Send an email to
> >
> > To Leave: Send an email to
> >
> > Archives: http://www.yahoogroups.com/group/c6x
> >
> > Other Groups: http://www.dsprelated.com
> >
> > Yahoo! Groups Links
Reply by Nithin Rajagopal●December 15, 20042004-12-15
You might also want to look at TMS320C6x Peripheral Support Library
Programmer's Reference (spru273b) to get an idea about the macros
and functions used in programming with DMA (and other peripherals if
u need).
-Nithin
--- In , "Pablo Fraile" <pablo.fraile@t...> wrote: >
> Read the TI document spra636. It include several examples on how to use EDMA > in different scenarios.
>
> -----Mensaje original-----
> De: mayank agarwal [mailto:may_ank77@y...]
> Enviado el: martes, 14 de diciembre de 2004 12:15
> Para:
> Asunto: [c6x] EDMA configure
>
>
> Can anyone guide me how to configure EDMA to transfer
> data from one location to another.
> Thanks,
> Mayank Agarwal
>
> __________________________________________________
>
> _____________________________________
> Note: If you do a simple "reply" with your email client, only the
author of > this message will receive your answer. You need to
do a "reply all" if you > want your answer to be distributed to the entire
group.
>
> _____________________________________
> About this discussion group:
>
> To Join: Send an email to
>
> To Post: Send an email to
>
> To Leave: Send an email to
>
> Archives: http://www.yahoogroups.com/group/c6x
>
> Other Groups: http://www.dsprelated.com
>
> Yahoo! Groups Links
Reply by Pablo Fraile●December 14, 20042004-12-14
Read the TI document spra636. It include several examples on how to use EDMA
in different scenarios.
-----Mensaje original-----
De: mayank agarwal [mailto:]
Enviado el: martes, 14 de diciembre de 2004 12:15
Para:
Asunto: [c6x] EDMA configure
Can anyone guide me how to configure EDMA to transfer
data from one location to another.
Thanks,
Mayank Agarwal
__________________________________________________
_____________________________________
Note: If you do a simple "reply" with your email client, only the
author of
this message will receive your answer. You need to do a "reply all" if
you
want your answer to be distributed to the entire group.
_____________________________________
About this discussion group: