Reply by Frank November 27, 20052005-11-27
"Jeroen Belleman" <jeroen@nospam.please> wrote in message
news:dm4c2t$7tg$1@sunnews.cern.ch...
> Frank, Frank wrote: > > It has 6 legs, corn yellow, approximately 0.8mm X 0.5mm X 0.3mm, > > the two rows of text are > > "MCL 0 322" > > "ADT 1-1W" > > It's a 1:1 transformer from Mini-Circuits. Look at: > http://www.minicircuits.com/dg03-236.pdf > It's the very first entry on that page. > > Jeroen Belleman
Thank you Jeroen. I think it is the correct device.
Reply by Jeroen Belleman November 24, 20052005-11-24
Frank, Frank wrote:
> It has 6 legs, corn yellow, approximately 0.8mm X 0.5mm X 0.3mm, > the two rows of text are > "MCL 0 322" > "ADT 1-1W"
It's a 1:1 transformer from Mini-Circuits. Look at: http://www.minicircuits.com/dg03-236.pdf It's the very first entry on that page. Jeroen Belleman
Reply by Frank, Frank November 24, 20052005-11-24
It has 6 legs, corn yellow, approximately 0.8mm X 0.5mm X 0.3mm,
the two rows of text are
"MCL 0 322"
"ADT 1-1W"
"."

Third row has a dot. I found two of this device on my 105MS ADC board,
while on another piece of board, somebody took off this chip. This makes me
wonder what the purpose of this chip is.

Hope you could help.

Frank