Dibyendu,
I am not sure if you have 1 or 2 DSP boards...
If you have only 1 and it is a 6711 DSK-
For using CCS only you need
PC_par_port->xds510pp_plus->dsp_board.
If you are using a windoze program to communicate with the DSK through HPI,
you can use your original setup only [the xds510pp_plus does have better
performance]
or you must use 2 par ports
PC_par_port_1->dsp_board [HPI]
PC_par_port_2->xds510pp_plus->dsp_board [JTAG]
When you hook up the pp_plus to the JTAG connector, it will disable the
CCS/JTAG connection on port 1.
If you you have two DSP boards, then you will need 2 parallel ports [or
purchase a USB or PCI emulator].
mikedunn
dibyendu mondal <d...@yahoo.co.in> wrote:
|