Reply by Mike Rosing January 22, 20062006-01-22
OK everybody, that message is NOT from me!
It contains a virus, probably from someone who has
my email address in their address book.

Unless we have full headers, we can't track it down at
all. It's probably hopeless. Just make sure you have
a virus scan ability (or use linux when viewing attachments!)

Patience, persistence, truth,
Dr. mike

On Sun, 22 Jan 2006, Jaime Andres Aranguren Cardona wrote:

> Hi,
>
> This post is not showing the attached photos. What's
> wrong?
>
> --- eresrch <eresrch@eres...> wrote: > ---------------------------------
>
> photo photo2
> photo3 > --------------------------------- > Jaime Andr Aranguren Cardona
> jaime.aranguren@jaim...
> jaime.aranguren@jaim... > __________________________________________________
>
>



Reply by Jaime Andres Aranguren Cardona January 22, 20062006-01-22
Hi,

This post is not showing the attached photos. What's
wrong?

--- eresrch <eresrch@eres...> wrote: ---------------------------------

photo photo2
photo3 --------------------------------- Jaime Andr Aranguren Cardona
jaime.aranguren@jaim...
jaime.aranguren@jaim... __________________________________________________




Reply by eresrch January 21, 20062006-01-21
          
         photo                                photo2                            photo3


Reply by Mike Rosing January 18, 20062006-01-18
On Wed, 18 Jan 2006, siva kumar wrote:

>
> Hello ,
>
> I am trying to implement UART on ADSP21161N processor
> I am using MAX3223 level converter .I found that some
> bits are going wrong.
> Can any one solve this.
>

Check out EE-60:
http://www.analog.com/UploadedFiles/Application_Notes/19064236ee_60.pdf#xml=http://search.analog.com/search/pdfPainter.aspx?url=http://www.analog.com/UploadedFiles/Application_Notes/19064236ee_60.pdf&fterm=uart&fterm!xx&fterm=uart%2021xx&la=en

Since there are no uart's built into any of the dsp's you have to
"bit bang" it. You can use interrupts for timing if you like.
An sport won't work.

Patience, persistence, truth,
Dr. mike


Reply by siva kumar January 18, 20062006-01-18

Hello ,

I am trying to implement UART on ADSP21161N processor
I am using MAX3223 level converter .I found that some
bits are going wrong.
Can any one solve this.
SIVAKUMAR