hi,
just a suggestion, if u r looking out for using a DSK for an audio
application , u can go for TMS320C6713 DSK.
Which has got a PCM3XXX series codec in it and can support multiple
sampling rates.
regards
seenu
seenu
George Wicks <g...@sbcglobal.net> wrote:
Sunil:
It looks like the AD535 is, actually was since it's now considered obsolete,
a Voice Codec. The data sheet suggests that it can go up to input/output
rate of 11.025 kHz (might be constrained to 8 kHz on the 6711 DSK), so I
think you're limited to just voice handling.
I TI has a PCM3003 audio codec daughtercard, which has much larger
range - that would probably be the best avenue - unless someone has any
other ideas.
HTH,
g.----- Original Message -----
From:
To:
Sent: Sunday, April 03, 2005 10:47 AM
Subject: [c6x] playing audio out of dsk6711 through ad535>
>
> Hi everybody,
> I have a simple question. I am using the DSK6711 which has an AD535 on
board. The AD535 has the sampling frequency limited to 8 Khz. Does this also
mean that i will be unable to play out audio through the ad535 at a higher
frequency, or is it just that the input analog signal will be sampled only
at 8 Khz?
>
> Thanks and regards
>
> -Sunil
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/c6x/
<*> To unsubscribe from this group, send an email to:
c...@yahoogroups.com
<*
Yahoo! India Matrimony: Find your life partner
online.