"dohm" <d.ohm@comcast.net> wrote in
news:l_idnR5aougA0G7enZ2dnUVZ_tudnZ2d@giganews.com:
> I am looking for a DSP development board for a bench-top project. I
> want to use an Analog Devices Sharc or equivalent TI processor. My
> input signal of interest is a LFM waveform with a 30MHz bandwidth
> (Lets assume it is at baseband for now). So, I would like to find a
> development board with dual A/D converters that sample > 30Msps. It
> would also be interesting to know if any development boards are
> available with A/Ds that sample at >60Msps. My search at this point is
> somewhat generic so I am not worried about the details yet. I just
> want to know what development board options are out there that are not
> designed for the usual audio applications.
>
> I noticed that Analog Devices has some extender board options for
> there Sharc EZ kits. Has anyone used one of these with there faster
> A/D evaluation boards? Does TI have more options? Any input or
> opinions are appreciated.
>
> Thanks!
>
> Dave Ohm
> "Happiness is only one IFFT away!"
>
>
Dave, we have our dspstak SHARC based boards that you can use in
conjunction with our dspstak a9244 ADC board. The a9244 uses an ADI
AD9244 sampling at 40 Msamples/s. The DSP is limited to 50M samples/s. We
also have an extender similar to the ADI extender, that adapts ADC dev
boards from ADI.
Check our web sit eor email for more info
--
Al Clark
Danville Signal Processing, Inc.
--------------------------------------------------------------------
Purveyors of Fine DSP Hardware and other Cool Stuff
Available at http://www.danvillesignal.com
Reply by dohm●February 15, 20062006-02-15
I am looking for a DSP development board for a bench-top project. I want to
use an Analog Devices Sharc or equivalent TI processor. My input signal of
interest is a LFM waveform with a 30MHz bandwidth (Lets assume it is at
baseband for now). So, I would like to find a development board with dual
A/D converters that sample > 30Msps. It would also be interesting to know
if any development boards are available with A/Ds that sample at >60Msps.
My search at this point is somewhat generic so I am not worried about the
details yet. I just want to know what development board options are out
there that are not designed for the usual audio applications.
I noticed that Analog Devices has some extender board options for there
Sharc EZ kits. Has anyone used one of these with there faster A/D
evaluation boards? Does TI have more options? Any input or opinions are
appreciated.
Thanks!
Dave Ohm
"Happiness is only one IFFT away!"