Reply by Bernhard 'Gustl' Bauer ●May 30, 20052005-05-30
Hi,

I have a cypress CY7C68001 connected to CE3 and 100MHz SDRAM connected
to CE0. SDRAM must run at 100MHz. CY7C68001 needs a data write hold time
of 10 ns and a address write hold time of 70ns! On a C6713 I can set WR
HOLD to 3. With 100MHz ECLKIN/ECLKOUT I can only get 30ns.

Any idea how I can get out of this mess without a HW change?

TIA

Gustl