Hi.
First, you can not use Xilinx DLC from VDSP. But there is gdbproxy
which interface gdb debugger and your DLC. It is destributed from http://blackfin.uclinux.org.
I have tried to download gcc's output file through the EZ-KIT's usb
cable. It works well. So, it may be worth to try download VDSP's dxe
file through gdb.
Regards,
Suikan
Reply by Mike Rosing●September 5, 20062006-09-05
On Tue, 5 Sep 2006 e...@yahoo.com wrote:
> Hi Everbody,
>
> I am going to use BF532 and I will need Emulator ...
> But it's expensive you know...
> I have JTAG Cable that I used in my previous project to program my CPLD.
> Shortly I have XILINX JTAG Program cable...
> I want to clear that ;
>
> Can I use this XILINX JTAG cable to emulate BF532 with adding any connection
and/or modification ???
> Is this possible??
>
> Thank you in advance ....
I'm going to guess no, it won't work. But it's worth a try!
Patience, persistence, truth,
Dr. mike
Reply by eayt...@yahoo.com●September 5, 20062006-09-05
Hi Everbody,
I am going to use BF532 and I will need Emulator ...
But it's expensive you know...
I have JTAG Cable that I used in my previous project to program my CPLD.
Shortly I have XILINX JTAG Program cable...
I want to clear that ;
Can I use this XILINX JTAG cable to emulate BF532 with adding any connection
and/or modification ???
Is this possible??