Refer to Spread Spectrum Systems by Richard Dixon. It has a flow chart and
associated data tables required for implementing a PN sequence generator. You
will be getting a discrete sequence now. And then you have to write a code to
simulate a continuous signal operating at particular frequency, to get a
continuous PN sequence signal running at the required frequency.
Good Luck!
Venkata S Telasula
taraka praveen wrote: hi,
For PN Sequence genearation we have one block in
simulink.You can use it for getting the Pn sequence
and send the output to the m-file by saving the output
of simulink in 'to workspace'.
Regards,
TarakapraveenGoud
--- samee ullah wrote:
> Hi members of this group:
> Can any body tell me how to generate PN sequence as
> an input to a
> non-coherent Binary FSK transmission system.
> Matlab code please.
>
> Thanks,
> Jameel
>
Never Lose Confidence in U'r Self.
Venkata S Telasula
1255 East 200 South APT # 12
Salt Lake City
Utah 84102-2425; USA
PHONE (M):(801)-209-5457
http://www.ece.utah.edu/~telasula