Reply by chirag jagadish April 23, 20092009-04-23
quite sure TI would not make such loop holes but worth tryin anyways

but read memory operation also involves giving read enable for the memory in addition to the address
this i believe involves more than just software programming

but in case you can do it, this should read out the contents of the location

--- On Wed, 22/4/09, g...@yahoo.co.in wrote:
From: g...@yahoo.co.in
Subject: [c28x] Re: f2812 got locked
To: c...
Date: Wednesday, 22 April, 2009, 9:00 AM

I am happy that you guys replied fast and not happy about F2812, that its gone:)

My second question was, see i have this F2812 with me and some how i am going to give a particular address to the address lines of F2812, then what will be there in the data lines if i try to read the data lines.

OR

My idea is like if i give the address of the password location on address lines and by default if the F2812 considers it as a read operation then i can read the password, right?

This is just a thought.. sorry if i am stupid.:)

Thanks & Regards
Georgy Daniel

Hi Guys,
>
>1. I was using an F2812 ezdsp board and unfortunately it got locked. I dont know the password, is there any way to unlock the processor.
>
>Please help me guys.
>
>2. Anybody knows what happens if give a particular address to the address lines of the processor will it give any data on the data lines??
>
>Regards,
>Georgy Daniel
>
>___________ _________ _________ ________

_____________________________________
Reply by geod...@yahoo.co.in April 22, 20092009-04-22
I am happy that you guys replied fast and not happy about F2812, that its gone:)

My second question was, see i have this F2812 with me and some how i am going to give a particular address to the address lines of F2812, then what will be there in the data lines if i try to read the data lines.

OR

My idea is like if i give the address of the password location on address lines and by default if the F2812 considers it as a read operation then i can read the password, right?

This is just a thought.. sorry if i am stupid.:)

Thanks & Regards
Georgy Daniel

Hi Guys,
>
>1. I was using an F2812 ezdsp board and unfortunately it got locked. I dont know the password, is there any way to unlock the processor.
>
>Please help me guys.
>
>2. Anybody knows what happens if give a particular address to the address lines of the processor will it give any data on the data lines??
>
>Regards,
>Georgy Daniel
>
>_____________________________________

_____________________________________
Reply by chirag jagadish April 21, 20092009-04-21
change the processor on the board.
it cannot be unlocked if you dont know the password.

can you re-word your second question
it is not clear

--- On Tue, 21/4/09, g...@yahoo.co.in wrote:
From: g...@yahoo.co.in
Subject: [c28x] f2812 got locked
To: c...
Date: Tuesday, 21 April, 2009, 2:16 PM

Hi Guys,

1. I was using an F2812 ezdsp board and unfortunately it got locked. I dont know the password, is there any way to unlock the processor.

Please help me guys.

2. Anybody knows what happens if give a particular address to the address lines of the processor will it give any data on the data lines??

Regards,
Georgy Daniel

_____________________________________
Reply by geod...@yahoo.co.in April 21, 20092009-04-21
Hi Guys,

1. I was using an F2812 ezdsp board and unfortunately it got locked. I dont know the password, is there any way to unlock the processor.

Please help me guys.

2. Anybody knows what happens if give a particular address to the address lines of the processor will it give any data on the data lines??

Regards,
Georgy Daniel

_____________________________________