Hi, group.
Just found that one of flag inputs (PF4) of ADSP-2184
machine does not work.
If it is configured as an output, it works fine, but if
it's input it
always appear to be "zero", and no IRQE interrupts happen
too.
Assuming the input is damaged I measured V-A characteristics
of all the
flag inputs. They appear to be the same: nearly zero current
at input
voltages between -0.4 and +5.5v and fast current growth out
of the
interval (to some 3mA at -0.7v and +6.8v). I thought that if
the device
is damaged with, say, static discharge, the bad input
will show different
V-A curve than other. Any ideas about the
case?
Another curios thing about '2184 is that when
addressing DM through IDMA
port I can normally write and read 8k words of it (not 4k as
in the datasheet).
I simply write different numbers to different DM locations
and then read.
All the numbers are at their places at DM addresses between
0x2000 and 0x3FFF.
Yes, addresses between 0x3FE0 and 0x3FFF appear to be normal
DM-memory
locations too when addressed through I-port. Is it
normal?
Thank you in advance.
Sergey Vlasov.