"Donald" <donald@dontdoithere.com> wrote in message 
news:sb-dnbjUO4KmiaLZRVn-qg@forethought.net...
> Clay S. Turner wrote:
>
>>
>> When I got to your link I'm asked to login. Which ID do I use?
>>
>> Clay
>
> The administrator may have required you to register before you can view 
> this page.
>
>
> Is english not your first language??

Yes, English is my 1st language. However, when I go to the link, the failure 
to access the code is due to one of several reasons given on a form. If the 
server knows I'm not registered, then it should say exactly that. But 
besides that crap,  I'm not going to register at some server just to do 
someone a favor.

Clay

Clay S. Turner wrote:

> 
> When I got to your link I'm asked to login. Which ID do I use?
> 
> Clay

The administrator may have required you to register before you can view 
this page.


Is english not your first language ???

you can download the code after register a forum user.

<water9580@yahoo.com> wrote in message 
news:1144908895.402720.142400@i39g2000cwa.googlegroups.com...
> This code was used for making the practical measurements in section 2.3
> of my thesis. This Matlab code allows an OFDM signal to be generated
> based on an input data file. The data can be random data, a grey scale
> image, a wave file, or any type of file. The generated OFDM signal is
> stored as a windows wave file, allowing it to be viewed, listened to
> and manipulated in other programs. The modified wave file can then be
> decoded by the receiver software to extract the original data. This
> code was developed for the experiments that I performed in my honours
> thesis, and thus has not been fully debugged.
>
> This is the original code developed for the thesis and so has several
> problems with it. The BER performance given by the simulations is
> infact Symbol Error Rate.
>
>
> code dowload link
>
> http://www.rdfwt.com/showthread.php?t=9
>

When I got to your link I'm asked to login. Which ID do I use?

Clay

i need referrer for registration

what error for register?

i cant register with referer
tell me the referer id
thanks

This code was used for making the practical measurements in section 2.3
of my thesis. This Matlab code allows an OFDM signal to be generated
based on an input data file. The data can be random data, a grey scale
image, a wave file, or any type of file. The generated OFDM signal is
stored as a windows wave file, allowing it to be viewed, listened to
and manipulated in other programs. The modified wave file can then be
decoded by the receiver software to extract the original data. This
code was developed for the experiments that I performed in my honours
thesis, and thus has not been fully debugged.

This is the original code developed for the thesis and so has several
problems with it. The BER performance given by the simulations is
infact Symbol Error Rate.


code dowload link

http://www.rdfwt.com/showthread.php?t=9