Some info are in Handbook of EZ kit 21065L
7 pin con. named J9 on the board has those singnals
Handbook says that EMAFE is exp. slot for user designed boards with codecs.
This handbook also have a schematic of system board i think it would be
heplfull . System clock is 33Mhz internal DSP clock is 66Mhz.
Lucas
>
>i am interfacing an SDRAM with ADSP-21065L EZ kit Lite board for
>memory expansion using EMAFE. the problem is, there are pins in SDRAM
>that are not specified in the dsp board. the following are the pins
>that i don't know where to connect :) :
>
>write enable
>chip select
>clock enable
>row address strobe
>column address strobe
>data input/output mask
>
>the SDRAM i'm using operates at 133MHz. will i connect the clock of
>the SDRAM to the transmit clock of the EMAFE?
>
>thank you!