"ksridhar" <ksridhar_7@yahoo.co.in> wrote in message
news:B4adnSYr9JjrUvTZRVn-qg@giganews.com...
> i came to know that FM demodulation can be done through envelope
detection.
> i have implemented the FM demodulation using envelope detection
> and i was unable to detect the original signal.
> i have not implemented the limiter circuit for this.
> i have passed the FM signal directly to the BPF followed by differentiator
> and envelope detector
> how to implement the limiter circuit.
> please help me.
>
>
Limiter circuits are normally amplifiers with high gain leading to
saturation. This is followed by a band-pass filter.
A high-bandwidth op-amp would work (no feedback) though you could obtain a
specialist IC for the purpose.
M.P
*** Posted via a free Usenet account from http://www.teranews.com ***
Reply by ksridhar●May 16, 20062006-05-16
i came to know that FM demodulation can be done through envelope detection.
i have implemented the FM demodulation using envelope detection
and i was unable to detect the original signal.
i have not implemented the limiter circuit for this.
i have passed the FM signal directly to the BPF followed by differentiator
and envelope detector
how to implement the limiter circuit.
please help me.