Reply by Mike Rosing August 24, 20072007-08-24
I have not played with this stuff at all, but it looks like the 21369 and
the ad1955 both have spi spigots. I'd think it would be pretty easy to
just wire directly between them. Can you solder wires between the spi
ports directly?
On Fri, 24 Aug 2007, David wrote:

> Any ideas? -David
>
> --- In a..., "David" wrote:
> >
> > Does any know if an app note exists on interfacing an AD1955 DAC eval
> > board to a ADSP-21369 SHARC Ezkit? I'm thinking of using I2S from the
> > SHARC and connect to the AD1955 board through the PCM connector.
> >
> > Any ideas where someone might find sample code and hardware ideas for
> > this?
> >
> > Thank you,
> >
> > -David
>
Reply by David August 24, 20072007-08-24
Any ideas? -David

--- In a..., "David" wrote:
>
> Does any know if an app note exists on interfacing an AD1955 DAC eval
> board to a ADSP-21369 SHARC Ezkit? I'm thinking of using I2S from the
> SHARC and connect to the AD1955 board through the PCM connector.
>
> Any ideas where someone might find sample code and hardware ideas for
> this?
>
> Thank you,
>
> -David
>
Reply by David August 21, 20072007-08-21
Does any know if an app note exists on interfacing an AD1955 DAC eval
board to a ADSP-21369 SHARC Ezkit? I'm thinking of using I2S from the
SHARC and connect to the AD1955 board through the PCM connector.

Any ideas where someone might find sample code and hardware ideas for
this?

Thank you,

-David