We have solved the problem of the internal ram. It was because that we did
not give a pulse signal to the reset pin of the DSP. When we change the
connection of that pin, the DSP can work well.
Thanks!
hi everyone ,
The board is designed by my lab.
CCS can find the dsp chip, but its iram ranging from 0x00000000 to 0x000fffff doesn't work well.
For example ,when writing to the address A, the data in these addresses( listing below) is changing accordingly:
A + 0x00000020,
A + 0x00100020,
A + 0x00200020,
A + 0x00300020,
A + 0x00100000,
A + 0x00200000,
A + 0x00300000.
Does anyone meet the same problems?
Thanks a lot for your reply!
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/c6x/
<*> To unsubscribe from this group, send an email to:
c...@yahoogroups.com
<*