> Hallo, Thanks for your response. I doubt that I haven't understood your
> reply exactly. Please confirm this.
>
> >A digital audio signal like a .wav is just made up of a sequence of
> >samples. In that way, it is just like any other digital signal you
> >would supply as an input to a system. As for a stereo signal, you'll
> >have two (presumably different) input signals on which you'll need to
> >perform the same operations.
>
> http://ccrma.stanford.edu/courses/422/projects/WaveFormat/
>
> For example, the 2nd pic in the above link - how to consider the data from
> .wav files as s[i]
The 16-bit words labeled "samples" are the data to filter. The odd
samples (starting counting at 1 as in Basic, rather than 0 as in C) are
from the left channel and the even from the right. The other stuff is
information about the signal that you may find useful, e.g., the length
of the signal, the samples per second, etc.
Assuming this line is in a loop, it's fine, ignoring edge effects. See
the function as it is implemented on pp. 595f of the reference you cite
below.
> (I am using Visual basic environment. Any ideas/suggestions in general are
> also welcome)
>
> >There are plenty of wavelet tutorials out there on the web and in
> >books. Google them. But, to answer your question, the scaling function
> >is used to capture the lowest scale you are considering. I'm not sure
> >what you're getting at with the wrap-around question.
>
> I do have only a vague idea about wrap-around conditions.
> Reference: in page no.592, 5th line below the matrix(13.10.1) in the
> following link
>
> http://www.library.cornell.edu/nr/bookcpdf/c13-10.pdf
In their code, they use wrap around:
wksp[i]=C0*a[n-1]+C1*a[n]+C2*a[1]+C3*a[2];
Some applications might be better with mirroring instead:
wksp[i]=C0*a[n-1]+C1*a[n]+C2*a[n]+C3*a[n-1];
or even zeros:
wksp[i]=C0*a[n-1]+C1*a[n];
It just depends on your needs.
Cheers! --M
Reply by sanindland●June 21, 20062006-06-21
Hallo, Thanks for your response. I doubt that I haven't understood your
reply exactly. Please confirm this.
>A digital audio signal like a .wav is just made up of a sequence of
>samples. In that way, it is just like any other digital signal you
>would supply as an input to a system. As for a stereo signal, you'll
>have two (presumably different) input signals on which you'll need to
>perform the same operations.
http://ccrma.stanford.edu/courses/422/projects/WaveFormat/
For example, the 2nd pic in the above link - how to consider the data from
.wav files as s[i]
D-4 scaling function:
a[i] = h0*s[2i]+ h1*s[2i+1]+ h2*s[2i+2]+ h3*s[2i+3]
where, s[i]-> input vector
(I am using Visual basic environment. Any ideas/suggestions in general are
also welcome)
>There are plenty of wavelet tutorials out there on the web and in
>books. Google them. But, to answer your question, the scaling function
>is used to capture the lowest scale you are considering. I'm not sure
>what you're getting at with the wrap-around question.
I do have only a vague idea about wrap-around conditions.
Reference: in page no.592, 5th line below the matrix(13.10.1) in the
following link
http://www.library.cornell.edu/nr/bookcpdf/c13-10.pdf
Thanks in advance,
San
Reply by mlimber●June 20, 20062006-06-20
sanindland wrote:
> Hallo,
>
> I am using .WAV files as audio signal input. For implementing D-4 Wavelet
> filter coefficients of both HPF and LPF, its said that I have to multiply
> with input array.
More accurately, you need to convolve the filters with the input.
> How will you consider the input from WAV files as
> arrays, also what will be in the case of stereo, where it has left and
> right channel values?
A digital audio signal like a .wav is just made up of a sequence of
samples. In that way, it is just like any other digital signal you
would supply as an input to a system. As for a stereo signal, you'll
have two (presumably different) input signals on which you'll need to
perform the same operations.
> Also, I am in new in the world of wavelet. What is
> the purpose of scaling function, if apply these filter coefficients to the
> input array and doesn't bothers about the wrap around conditions?
There are plenty of wavelet tutorials out there on the web and in
books. Google them. But, to answer your question, the scaling function
is used to capture the lowest scale you are considering. I'm not sure
what you're getting at with the wrap-around question.
Cheers! --M
Reply by sanindland●June 19, 20062006-06-19
Hallo,
I am using .WAV files as audio signal input. For implementing D-4 Wavelet
filter coefficients of both HPF and LPF, its said that I have to multiply
with input array. How will you consider the input from WAV files as
arrays, also what will be in the case of stereo, where it has left and
right channel values? Also, I am in new in the world of wavelet. What is
the purpose of scaling function, if apply these filter coefficients to the
input array and doesn't bothers about the wrap around conditions?
Thanks in advance
San