Hi all, Can anyone tell me if multiword frames work under SPI on this chip? The data sheet spra551a says it should but a help note in the knowledge base says: ############################## C6000 McBSP in SPI Mode Problem: Can the C6000 McBSP in SPI Mode be used with multi-word frames? Solution: The C6000 McBSP in SPI Mode will work only with single-element single- phase frames. A Frame Sync (a.k.a. Chip Select in SPI mode) signal is required to be asserted and de-asserted for each element. Multi-word frames cannot be used in SPI Mode. However, if four 8-b data needs to be transacted on the SPI pins per Chip Select, the McbSP can be programmed to do a single 32-b transfer. In this case, the FS/CS will be asserted continuously for the 32-bits of data and then de- asserted. ############################### Help!!!!! TIA, Dave