> Hello, I have the book of Dr Rulph Chassaing on DSK 6713, along with its CD
> containg all the codes and support files. Now i am following the
> instructions of the book to start implementing the starting examples
> including "sine8_LED"and "sine_buff".I have included all the files and
> libraries and followed the settings as mentioned in the book. How ever
> when i try to build my project it creates three object files
> "sine8_buff.obj,c6713dskinit.obj and Vectors_intr.obj" and then there are
> 4 errors
>
> symbol _DSK6713_AIC23_codecControlhandle is defined multiple times
>
> symbol _DSK6713_AIC23_codecdatahandle is defined multiple times
>
> these errors occur once referring to the obj files c6713dskinit.obj and
> sine8_buff and then referring to c6713dskinit.obj and
> dsk6713_aic23opencodec.obj.
>
> Since i am just a beginner in this field i have completely no idea what is
> happening. So if any one knows the solution kindly tell me.It will be a
> great help for me.
I can't promise to solve your problem instantly, but since I am sitting
in front of Code Composer and a 6713 DSK right now and have Rulph
Chassaing's software here also ...
What source files _exactly_ do you have in your project? You should
have _only_ c6713dskinit.c, sine8_buf.c, and Vectors_intr.asm, as per
figure 1.10 in the book.
Are you using Code Composer version 3.1.0?
I am using Rulph Chassaing's software with it (as opposed to CCS
version 2) for the first time and in order to get the sine8_buf project
to compile I've made changes in the Build Options and to the locations
of some support files. That said, I haven't seen and can't replicate
exactly the error you describe.
If no-one else solves your problem soon, email me a copy of
cc_build_Debug.log, and I'll have a look at it.
Donald
Reply by hassanjaleel●July 12, 20062006-07-12
Hello, I have the book of Dr Rulph Chassaing on DSK 6713, along with its CD
containg all the codes and support files. Now i am following the
instructions of the book to start implementing the starting examples
including "sine8_LED"and "sine_buff".I have included all the files and
libraries and followed the settings as mentioned in the book. How ever
when i try to build my project it creates three object files
"sine8_buff.obj,c6713dskinit.obj and Vectors_intr.obj" and then there are
4 errors
symbol _DSK6713_AIC23_codecControlhandle is defined multiple times
symbol _DSK6713_AIC23_codecdatahandle is defined multiple times
these errors occur once referring to the obj files c6713dskinit.obj and
sine8_buff and then referring to c6713dskinit.obj and
dsk6713_aic23opencodec.obj.
Since i am just a beginner in this field i have completely no idea what is
happening. So if any one knows the solution kindly tell me.It will be a
great help for me.