Reply by aliu...@hotmail.com●August 21, 20092009-08-21
Hi,..i have separated the transmitter and receiver and implemented them on two
different kits,...yes the antennas work from 400-450MHZ ,..but i have done
communication at 262MHz through these antennas ans results were good,...now i
wanted to ask that cani use the same receiver for fm reception too with the
88-108MHz antenna ,...like would i have to chage the filters etc
Hi, can anybody kindly suggest me from where i can get FM receiver (demodulator)
models to implement on SFF SDR Development platform....please help
Reply by ytac...@ou.edu●July 17, 20092009-07-17
Hi, can anybody kindly suggest me from where i can get FM receiver (demodulator)
models to implement on SFF SDR Development platform....please help
I would suggest you to look at the tutorial of building FM receiver for GNU
radio. While it is for a different platform but you can get alot of hints from
there. http://www.linuxjournal.com/article/7505
also check what frequency you need to operate at. the antennas shiped with
Lyrtech kits are centered at 400MHz
Reply by ytac...@ou.edu●July 17, 20092009-07-17
Hi, can anybody kindly suggest me from where i can get FM receiver (demodulator)
models to implement on SFF SDR Development platform....please help
I understand that the Demo has a CTCSS encoding scheme so your problem is mainly
the succesful removing of that encoding from the RX chain. Now I can provide you
the following hints:
Which platform are you after. Do you mean the one produced by Lyrtech? if so,
they ship a number of demos with it. One of them is FRS demonstration which is
basically an FM transceiver.
Hi, can anybody kindly suggest me from where i can get FM receiver (demodulator)
models to implement on SFF SDR Development platform....please help
Reply by aliu...@hotmail.com●July 9, 20092009-07-09
Hi, can anybody kindly suggest me from where i can get FM receiver (demodulator)
models to implement on SFF SDR Development platform....please help