first check if the board is all right
usually if CPU is burnt, such messages appear
--- On Tue, 19/1/10, at_ork wrote:
From: at_ork
Subject: [c28x] Trouble running target CPU
To: c...
Date: Tuesday, 19 January, 2010, 9:28 AM
Hi all, I am using ccs v2 and eZdsp TMS230F2812 for motor control. When i try to
run the program, I received error message.
Can't Run Target CPU
Error 0x00000020/- 2074
Error during:Execution
Can't read processor status.
From where should i start troubleshooting?
_____________________________________