I get the same error when I move from a project that was developed for
a DSK and than use it inside the simulator. To resolve teh issue, go
to the DSP/BIOS setting and change the RTDX to simulator. In your
case you say you have already changed the value so I am not sure what
you should do. You can send me the project and I can take a look if
you wish.
Shlomo.
--- In c6x@c6x@..., farmorbiolo@y... wrote:
>
> Hi,
>
> I'm having problems with RTDX, using the C6711 DSK. When I finish
to load the project, I receive the message:
>
> RTDX target applucation does not match emulation protocol!
> Loaded program was created with an rtdx library which does not
match the target device.
>
> I've already read about this problem, and the solution was to set
the RTDX configuration to JTAG, but, in my case, it isn't working.
It
is already set to JTAG, but I still receive this message. Can anyone
help me?
>
> Thanks,
>