Reply by August 21, 20062006-08-21

I have an EZ-Kit lite for the BF533 cpu. It connects to the PC through
an undocumented USB interface, which most certainly uses JTAG to the
Could it be so that this USB-interface could connect to an "outside"
system, i.e. not the on-board Blackfin?
The EZ-kit has a JTAG-connector and the documentation says that if
connected the USB-interface is disconnected. Probably it is more or
less connected in parallell to the cpu then.

Since there exists a USB-emulator from Analog, it could be the same
hardware recycled on the EZ-kit.

Anybody has any experiences with this?