The
following FAQ (DSP-14254) from our
website may help you, in particular try the exercises that it talks
about:
Problem:
How is
Matlab supported by 56800
development tools?
Solution:
Matlab
is not directly supported by our development tools, but you can use Matlab to
generate inputs, which are readable by the EVM using SDK's File I/O. The
results
of processing these inputs can be uploaded from the EVM back to your PC using
File I/O. Matlab can then process the outputs and compare them with predicted
results.
For more details on SDK's File I/O see Section 6.2 in the SDK Targeting
manual
belonging to your EVM.
Examples of using File I/O and Matlab are available for 56F805, 56F807, and
56F826 EVMs. Download the 56800 FIR Lab SEA.exe
(http://e-www.motorola.com/support/technial/faq/DSP/faq14254/FAQ_14254_FIR_Lab_SEA_V1.exe
)or 56800 IIR Lab SEA.exe
(http://e-www.motorola.com/support/technial/faq/DSP/faq14254/FAQ_14254_IIR_Lab_SEA_V1.exe
) and install it at the root of your Drive D:, then set the default directory
in Matlab to D:\FIR_Lab\Matlab
or D:\IIR_Lab\Matlab.
In this directory you will find the Matlab script
FilterLabScript.m which you can run from
Matlab. Follow the prompts in Matlab.
Leonard N.
Elevich
Motorola
DSPO
-----Original
Message-----
From: li_xinming
[mailto:l...@yahoo.com]
Sent: Friday, October
11, 2002 9:06 PM
To: m...@yahoogroups.com
Subject: [motoroladsp] DSP56807
FileIO Data
Hi,
all:
I `m using DSP56F807EVM FILEIO to save ADC data
into a data file on
hostPC. Next, I have to process these data by
MatLab Wavelet Toolbox.
The problem is I cannot load data into MatLab.
Does anyone have
experience to handle the problem? Thanks for help
in advance.
David
_____________________________________
Note: If you do a simple "reply" with
your email client, only the author of this message will receive your
answer. You need to do a "reply all" if you want your answer to
be distributed to the entire group.
_____________________________________
About this discussion group:
To Join: m...@yahoogroups.com
To Post: m...@yahoogroups.com
To Leave: m...@yahoogroups.com
Archives:
http://www.yahoogroups.com/group/motoroladsp
More Groups:
http://www.dsprelated.com/groups.php3
">Yahoo!
Terms of Service.