Gary Marsh <dont@spam.me.plz> wrote in
news:VtQPg.30296$E67.973@clgrps13:
> Cirrus makes an evaluation board for their CS42448 audio CODEC, which
> provides 6 ADC / 8 DAC channels. You should be able to jumper this
> board to a SPORT on the EZ-KIT.
>
> GM
>
> Arne Borsum wrote:
>> Hi,
>>
>> I am developing audio applications on the ADSP-21369 EZ-Kit Lite
>> board.
>>
>> The board has 8 channels audio output but only 2 channels input,
>> although the DSP itself supports more channels.
>>
>> Now I am searching for a extension board for the EZ-Kit which
>> provides 6 or more (analog) input channels. Is there anything like
>> this availble?
>>
>> Regards,
>>
>> Arne Borsum
>>
>
Our dspstak 21369zx/zx2 boards are ADSP-21369 based. We have an I/O
board, dspstak c192k48 that has 4 inputs and 8 outputs. You can stack up
to 4 of these cards to create systems with up to 16 inputs and 32
outputs.
We have special extender cards for balanced audio as well.
Email me for more details.
--
Al Clark
Danville Signal Processing, Inc.
--------------------------------------------------------------------
Purveyors of Fine DSP Hardware and other Cool Stuff
Available at http://www.danvillesignal.com
Reply by Gary Marsh●September 19, 20062006-09-19
Cirrus makes an evaluation board for their CS42448 audio CODEC, which
provides 6 ADC / 8 DAC channels. You should be able to jumper this board
to a SPORT on the EZ-KIT.
GM
Arne Borsum wrote:
> Hi,
>
> I am developing audio applications on the ADSP-21369 EZ-Kit Lite board.
>
> The board has 8 channels audio output but only 2 channels input,
> although the DSP itself supports more channels.
>
> Now I am searching for a extension board for the EZ-Kit which provides 6
> or more (analog) input channels. Is there anything like this availble?
>
> Regards,
>
> Arne Borsum
>
Reply by Arne Borsum●September 13, 20062006-09-13
Hi,
I am developing audio applications on the ADSP-21369 EZ-Kit Lite board.
The board has 8 channels audio output but only 2 channels input,
although the DSP itself supports more channels.
Now I am searching for a extension board for the EZ-Kit which provides 6
or more (analog) input channels. Is there anything like this availble?
Regards,
Arne Borsum