Reply by Gloria Goldberger●July 26, 20012001-07-26
Hi Sasken,
You can use the software reset bit in SYSCON?
Gloria Goldberger
--- Sundararaman Sivaraman <> wrote: > Hi all,
> iam working on a ADSP 21060 processor. Is there
> any
> way to reset the processor thru software ? ie thru
> any
> specified instruction or setting any particular bit
> in
> a control register . A reply asap will be really
> helpful to me.. thanks in advance
>
> with regards
> sundararaman sivaraman
> Sasken Commn Technologies Limited
> Bangalore, India
>
> =====
> __________________________________________________
>
> _____________________________________
> Note: If you do a simple "reply" with your email
> client, only the author of this message will receive
> your answer. You need to do a "reply all" if you
> want your answer to be distributed to the entire
> group.
>
> _____________________________________
> About this discussion group:
>
> To Join: Send an email to
> To Post: Send an email to
>
> To Leave: Send an email to
> Archives: http://groups.yahoo.com/group/adsp
>
> Other Groups: http://www.dsprelated.com/groups.php3
> ">http://docs.yahoo.com/info/terms/
=====
Gloria Goldberger
Boston University
College of Electrical and Computer Systems Engineering
Hi Sunder,
You can set bit0 of SYSCON reg.
cheers
kannan
>>> Sundararaman Sivaraman <> 07/24/01
08:40am >>> Hi all,
iam working on a ADSP 21060 processor. Is there any
way to reset the processor thru software ? ie thru any
specified instruction or setting any particular bit in
a control register . A reply asap will be really
helpful to me.. thanks in advance
with regards
sundararaman sivaraman
Sasken Commn Technologies Limited
Bangalore, India
=====
__________________________________________________
_____________________________________
Note: If you do a simple "reply" with your email client, only the
author of this
message will receive your answer. You need to do a "reply all" if you
want your
answer to be distributed to the entire group.
_____________________________________
About this discussion group:
Reply by Sundararaman Sivaraman●July 24, 20012001-07-24
Hi all,
iam working on a ADSP 21060 processor. Is there any
way to reset the processor thru software ? ie thru any
specified instruction or setting any particular bit in
a control register . A reply asap will be really
helpful to me.. thanks in advance
with regards
sundararaman sivaraman
Sasken Commn Technologies Limited
Bangalore, India