>
> I need help on how to interface AD73311 codec with TMS320F28xx through
> McBSP.
> I've read AD73311.pdf but still can not understand what is a reason to
> send every word two times.
> If someone has any experience or source code welcome to chat.
>
Are you using only one codec or two ?
The 73322 is 2x 73311 here you send every command 2 times because the
codecs are daisy chained
We are using here the 73322 and configuring it is a mess, (but we also
have the chip on the PCB yet ;-)
Markus Greim
Reply by Unomano●October 26, 20062006-10-26
pcb is already designed so i can not change it:(
Vladimir Vassilevsky wrote:
> Unomano wrote:
>
> > Hello all,
> >
> > I need help on how to interface AD73311 codec with TMS320F28xx through
> > McBSP.
>
> Don't use AD733xx. It is a very lousy but expensive codec. Use any of
> TLV320AICxxx codecs.
>
> > I've read AD73311.pdf but still can not understand what is a reason to
> > send every word two times.
> > If someone has any experience or source code welcome to chat.
> >
>
> Vladimir Vassilevsky
>
> DSP and Mixed Signal Design Consultant
>
> http://www.abvolt.com
Reply by Vladimir Vassilevsky●October 26, 20062006-10-26
Unomano wrote:
> Hello all,
>
> I need help on how to interface AD73311 codec with TMS320F28xx through
> McBSP.
Don't use AD733xx. It is a very lousy but expensive codec. Use any of
TLV320AICxxx codecs.
> I've read AD73311.pdf but still can not understand what is a reason to
> send every word two times.
> If someone has any experience or source code welcome to chat.
>
Hello all,
I need help on how to interface AD73311 codec with TMS320F28xx through
McBSP.
I've read AD73311.pdf but still can not understand what is a reason to
send every word two times.
If someone has any experience or source code welcome to chat.
tnx