Be aware that this will also wipe out the rest of the SYSCON register,
which will probably have catastrophic consequences... Rather read back the SYSCON register values and OR in the 0x1, i.e.: unsigned uSyscon = *(unsigned *)0x0; uSyscon = uSyscon | 0x1; (*(unsigned *)0x0) = uSyscon; Cheers, Clifford Christoph Ripcke wrote: > Hi ! > > Have a try with the folllowing: > > *(int*)0 = 1; > > The write of a '1' to bit 0 of SYSCON (IOP 0) should reset the SHARC. At > least on the 21061 it works. (s.a. Apendix E.9 of SHARC user man. BITSRST) > > regards > Christoph > > -----Ursprgliche Nachricht----- > Von: Sundararaman Sivaraman [mailto:] > Gesendet: Dienstag, 24. Juli 2001 09:40 > An: > Betreff: [adsp] Help > > Hi all, > iam working on a ADSP 21060 processor. Is there any > way to reset the processor thru software ? ie thru any > specified instruction or setting any particular bit in > a control register . A reply asap will be really > helpful to me.. thanks in advance > > with regards > sundararaman sivaraman > Sasken Commn Technologies Limited > Bangalore, India > > ===== > > __________________________________________________ > > _____________________________________ > Note: If you do a simple "reply" with your email client, only the author of > this message will receive your answer. You need to do a "reply all" if you > want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://groups.yahoo.com/group/adsp > > Other Groups: http://www.dsprelated.com/groups.php3 > ">http://docs.yahoo.com/info/terms/ > > _____________________________________ > Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://groups.yahoo.com/group/adsp > > Other Groups: http://www.dsprelated.com/groups.php3 > ">http://docs.yahoo.com/info/terms/ | |||||||
|