See the section 2.4.1.1 (or page 32) in
TI's DSP/BIOS II Users Guide spru326C. That describes all your
need.
-Ashim
|
See the section 2.4.1.1 (or page 32) in
TI's DSP/BIOS II Users Guide spru326C. That describes all your
need.
-Ashim
|
Hi all, If I create a DSP/BIOS configuration file, the code composer also generates a linker command file. I have some user specific memory section which I add manually into the linker command file. If I change the DSP/BIOS configuration file, the linker command file will also be changed and my user specific memory section are overwritten. Where can I define this user specific memory section in the way that they will not be overwritten each time I change my DSP/BIOS configuration file? Thanks in advance. Thomas -- //\\\\ | ~ ~ | ( O O ) ___________________________________oOOo______( )_____oOOo_______ Thomas Schwere Phone: +41 1 445 16 61 Supercomputing Systems AG Fax: +41 1 445 16 10 Technoparkstrasse 1 Url: www.scs.ch CH-8005 Zurich Email: Switzerland Oooo _________________________________________oooO______( )_________ ( ) ) / \ ( (_/ \_) |
|