On 6/9/05, Frankie Myers <fbmyers@fbmy...> wrote: > Thanks! Will do...
>
> -Frankie
>
> -----Original Message-----
> From: Bhooshan Iyer [mailto:bhooshaniyer@bhoo...]
> Sent: Thursday, June 09, 2005 11:00 AM
> To: fbmyers@fbmy...
> Cc: c55x@c55x...
> Subject: Re: [c55x] Running CCS w/o DSK Attached
>
> Frankie--
> In the stricest sense,the CCS that comes along with the DSK was not
> intended to be operated without the DSK.This behavior is
> intentional.But having said that there are work arounds suggested by
> some seasoned hackers here at this group.One of them goes by the name
> Jeff Brower. Look for messages sent by him, even if you dont find
> direct info on this you would have learnt a lot anyways!
>
> --Bhooshan
> On 6/9/05, fbmyers@fbmy... <fbmyers@fbmy...> wrote:
> > Hi,
> >
> > We're using the c5510 DSK from Spectrum Digital and when we try
to run
> Code
> > Composer without the board attached it gives us and error and refuses
to
> > load. Is there a way to change this?
> >
> > -Frankie
Reply by Frankie Myers●June 9, 20052005-06-09
Well, there is an ignore option but it's grayed out! Any ideas?
-Frankie
-----Original Message-----
From: ajith_cet@ajit... [mailto:ajith_cet@ajit...]
Sent: Thursday, June 09, 2005 8:59 AM
To: fbmyers@fbmy...
Cc: c55x@c55x...
Subject: Re: Running CCS w/o DSK Attached
Hi,
If you are getting an error message with options ABORT, RETRY, IGNORE and
CANCEL, try giving IGNORE and you should get the CCS.
Cheers,
Ajith.
fbmyers@fbmy... writes:
> Hi,
>
> We're using the c5510 DSK from Spectrum Digital and when we try to
run Code Composer without the board attached it gives us and error and
refuses
to load. Is there a way to change this? >
> -Frankie
>
>
>
>
>
Reply by Bhooshan Iyer●June 9, 20052005-06-09
Frankie--
In the stricest sense,the CCS that comes along with the DSK was not
intended to be operated without the DSK.This behavior is
intentional.But having said that there are work arounds suggested by
some seasoned hackers here at this group.One of them goes by the name
Jeff Brower. Look for messages sent by him, even if you dont find
direct info on this you would have learnt a lot anyways!
--Bhooshan
On 6/9/05, fbmyers@fbmy... <fbmyers@fbmy...> wrote: > Hi,
>
> We're using the c5510 DSK from Spectrum Digital and when we try to run
Code
> Composer without the board attached it gives us and error and refuses to
> load. Is there a way to change this?
>
> -Frankie
-------------------------------
"I've missed more than 9000 shots in my career.
I've lost almost 300 games. 26 times I've been trusted to take the
game winning shot and missed.
I've failed over and over again in my life.
And that is why I succeed."
-- Michael Jordan
--------------------------------
Reply by ajit...@SoftHome.net●June 9, 20052005-06-09
Hi,
If you are getting an error message with options ABORT, RETRY, IGNORE and
CANCEL, try giving IGNORE and you should get the CCS.
Cheers,
Ajith.
fbmyers@fbmy... writes:
> Hi,
>
> We're using the c5510 DSK from Spectrum Digital and when we try to run
Code Composer without the board attached it gives us and error and refuses to
load. Is there a way to change this?
>
> -Frankie
>
>
>
>
>
Reply by fbmy...@ncsu.edu●June 9, 20052005-06-09
Hi,
We're using the c5510 DSK from Spectrum Digital and when we try to run Code
Composer without the board attached it gives us and error and refuses to load.
Is there a way to change this?