"Gagan_sulfnbk" <gagan1@gmail.com> wrote in news:1169719448.799232.163780
@v33g2000cwv.googlegroups.com:
> hi
>
> i was looking for sharkfin processors but i am confused,
> does the sharkfin processor comes with a board on which it is already
> installed and the whole module can run independent of a pc?
>
> or the sharkfin processors listed by analog devices are only processors
> and i would have to purchase the board separately. can i put multiple
> processors on single board?
>
> is the board more costly or the processor?
> please advice, i am a beginner in porting my program to dsp.
>
> thanks in advance
>
> gagan
>
SHARCs and Blackfins are DSP processors manufactured by Analog Devices.
Sharcfin is a proprietary PCI interface available from Bittware.
Danville manufactures SHARC based boards for embedded applications.
--
Al Clark
Danville Signal Processing, Inc.
--------------------------------------------------------------------
Purveyors of Fine DSP Hardware and other Cool Stuff
Available at http://www.danvillesignal.com
Reply by steve●January 25, 20072007-01-25
So you mean Sharc processor?
The Sharc processors listed by analog devices are only the processors
and are about $6, the eval boards are about $500
On Jan 25, 5:04 am, "Gagan_sulfnbk" <gag...@gmail.com> wrote:
> hi
>
> i was looking for sharkfin processors but i am confused,
> does the sharkfin processor comes with a board on which it is already
> installed and the whole module can run independent of a pc?
>
> or the sharkfin processors listed by analog devices are only processors
> and i would have to purchase the board separately. can i put multiple
> processors on single board?
>
> is the board more costly or the processor?
> please advice, i am a beginner in porting my program to dsp.
>
> thanks in advance
>
> gagan
Reply by Gagan_sulfnbk●January 25, 20072007-01-25
hi
i was looking for sharkfin processors but i am confused,
does the sharkfin processor comes with a board on which it is already
installed and the whole module can run independent of a pc?
or the sharkfin processors listed by analog devices are only processors
and i would have to purchase the board separately. can i put multiple
processors on single board?
is the board more costly or the processor?
please advice, i am a beginner in porting my program to dsp.
thanks in advance
gagan