Hi Georg,
In my project I use 2x16 LCD display to show inwhich process C6713 is. I just
used the data pins of Memory Expansion Module(J4). I drived lcd by a
microcontroller of Microchip(pic) because it is a very easy and well-explained
topic in Pic CCS. C6713 uses data pins as outputs and in every different state
of your operation you may change the status of these outputs. I combined outputs
to Pic as input.Pic recognizes different states and writes related things to
LCD. If you want to ask any questions just send me e-mails.Good luck with your
project.
Osman
hi,
>
>i feel that displaying itself is a time consuming
>process.
>
>LCDs require a lot of wait states(after each command
>and data inputs to the LCD controller) and you might
>end up wasting a lot of time trying to display.
>
>if it is un-necessary in the final product, i would
>advice you to stay away from doing it.
>
>you can display inside CCS using DSP-BIOS and
>log_printf command (even though i am not very familiar
>with DSP-BIOS, i know that thia can be done).
>
>hope this helps you,
>
>if i am wrong, i request the members of this group to
>correct me and help.
>
>bye
>
>--- georg laban wrote:
>
>> hi! i've got a c6713 board and i want to use a LCD
>> Display (1 row, 16 signs) to show what process is
>> running.
>>
>> does anybody know what type of display is the best
>> or
>> does anybody have got a good tutorial about learning
>> to controll an LCD Display by using an c6713?
>>
>> thanks georg!
>>
>> ps: sorry for the bad english.
>>
>>
>>
>>
>>
>___________________________________________________________
>>
>> Telefonate ohne weitere Kosten vom PC zum PC:
>> http://messenger.yahoo.de
>>
>> c...
>>
>>
>>__________________________________________________________
>Yahoo! India Matrimony: Find your partner now. Go to
http://yahoo.shaadi.com