Penixilin-
> I have been trying to process my data with FFT to
analyze
> the natural frequency of it. I try to use a high pass filter
> of 1 or 2 HZ because the source of the signal is a DC and i
> found that the result is still weird. It is a DC motor
> attach to a load and run it and will last for approximately
> 2 sec only.
Your HPF would have to be really sharp to remove just a few Hz. What is your
sampling rate? What type of filter are
you using? How many taps (FIR) or what order (IIR)?
> So i would like to ask the best DSP method to analyze
this
> as if i just use FFT i would see a dominant 0Hz.
If you use a large enough FFT size you should be able to separate dc from 1 Hz.
Your Hz/bin should be at least 0.5 or
less (i.e. sampling rate/FFT size).
-Jeff