Motorola DSP Help I am having some problems using the stationary (Codewarrior) for the 56826 Flash/ExtRam. I run my software and it works great in ExtRam but will not run under Flash. I traced a big problem back to sprintf calls. Any time I try to call that it blows up. So if you cannot use sprintf, how can you format doubles for output as strings? There seems to be no other way to do it that is acceptable. I mean obviously we can write whatever code it takes to read a memory location and ya know twist the bit to the bang to the bing to the bong.... but jeeesh isn't that what the SDK is for? PLus I dunno how to do that although life is for learning, but time is of the essence. I also noticed that in linker.cmd the .xFlash section has data going in for initialized contants. I have removed this with comments flags # in front and that freed the data flash. I also removed the DSP libraries from the project to trim the size of stuff. Are there other ways to do that as well, when we are only using the chip as a micro-controller at this time. Also there are some really strange things happening when running in Flash as opposed to ExtRam, where is this documented? Thanks for any help and please excuse my ignorance as this kind of progrmming is new to me. I am an old hand when there is a big huge operating system and a ton of resources, but this tight squeeze stuff is all new. Thanks (Glad you folks are here) Glenn |