Hi, though posted it long back, i thought it would be worhtwhile to
follow this up as I found the solution and it might be useful for
somebody someday. finally it worked with the following commands

slattach -p slip -s 115200 -e ttyS0
stty -F /dev/ttyS0 -icanon -crtscts -ignbrk clocal
slattach -p slip -s 115200 -m ttyS0 &

basically the crtscts option which is not supported by the DSP was not
being disabled. the above commands helped doing it.

amar

amaraavati@yahoo.com (amara vati) wrote in message news:<f89b870.0405242255.7f5d1c89@posting.google.com>...
> hi,
> 
> have anybody configured slip for balckfing dsp BF533. My SLIP config
> through serial cable works. but with the dsp, not a single byte of
> data is being delivered. i have checked the serial line configuration
> using the stty command. i have disabled any flow control. still i am
> unable to transfer any data. any help appreciated.
> 
> amar

hi,

have anybody configured slip for balckfing dsp BF533. My SLIP config
through serial cable works. but with the dsp, not a single byte of
data is being delivered. i have checked the serial line configuration
using the stty command. i have disabled any flow control. still i am
unable to transfer any data. any help appreciated.

amar