If it was just your program, I would say that it was trying to read inaccessible memory ... from a bad pointer, or something like that. But if the examples programs are doing the same, there may be bad memory on your board. If you have the board test program, I would run it. Regards, Robert _____ From: code-comp@code... [mailto:code-comp@code...] On Behalf Of martinmartalopez@mart... Sent: Friday, November 25, 2005 11:05 AM To: code-comp@code... Subject: [code-comp] error of application: cvrlh40.exe Hi, I'm a beginer in codo composer studio and i have the following problem: when i compile a file i have an error of application in the aplication cvrlh40.exe, there is an instruction that are referencing an address that can not be read. I have this error if I compile my programm or if I compile an example given for the code composer studio. Can anybody please help me? I'm looking forward to an answer. Thank you so much. Marta

Is it possible to trigger 2 DMA\'s off the same McBSP event? Eg. McBSP codec receive event triggers a receive DMA which reads data from that McBSP. Same receive event triggers a different DMA that writes to a different McBSP\'s transmit register. Can this be done? Thanks, Brian -- ----------------- Brian C. Lane (W7BCL) Programmer www.shinemicro.com RF, DSP & Microcontroller Design