Hari-
> Myproblem was sloved. Finally the device driver for XDS510USB is wrong. Now i
> have installed the right one. Now i can run the Emualtor.

Thanks for letting us know!

-Jeff
> ----- Original Message -----
> From:amitay uoozan
> To: hari
> Sent: Monday, August 14, 2006 6:35 PM
> Subject: Re: [c6x] XDS510 USB Driver Problem on DM642EVM Board
> hi harry did you try to replace the usb cable itself?the usb cable i got
> with the dsp dev kit cause to me some problems till i replace it
>
> hari wrote:
>
> Hi guys, Presently i am having DM642EVM Board with me.I am
> having CCS2.2 and also i followed the steps they were present
> in the "dm642evm_QuickStartGuide". After installing the
> patches and "SdConfig C6000 v2.2x" i am not getting the
> emulator to run. After all installation i started with "Setup
> CCS 2", then i imported EVMDM642XDS510USB Emulator. Then while
> starting the CCS2.2 it is showing the error that " Can't
> Initialize Target CPU I/O Port = 510 Board Name: DM642 EVM
> via XDS510-USBCpu Name:DSP_C64xx...//....//. " i did as per
> the installation guide.i tried so many times. Any Sujjestion
> pls... Regards,Hari
>

Hi Guys,
Myproblem was sloved. Finally the device driver for XDS510USB is wrong. Now i have installed the right one. Now i can run the Emualtor.
Thanks all
----- Original Message -----
From: amitay uoozan
To: hari
Sent: Monday, August 14, 2006 6:35 PM
Subject: Re: [c6x] XDS510 USB Driver Problem on DM642EVM Board
hi harry

did you try to replace the usb cable itself?
the usb cable i got with the dsp dev kit cause to me some problems till i replace it

hari wrote:
Hi guys,

Presently i am having DM642EVM Board with me.
I am having CCS2.2 and also i followed the steps they were present in the "dm642evm_QuickStartGuide".

After installing the patches and "SdConfig C6000 v2.2x" i am not getting the emulator to run.
After all installation i started with "Setup CCS 2", then i imported EVMDM642XDS510USB Emulator.

Then while starting the CCS2.2 it is showing the error that

" Can't Initialize Target CPU
I/O Port = 510
Board Name: DM642 EVM via XDS510-USB
Cpu Name:DSP_C64xx
..
.//...
.//.

"

i did as per the installation guide.
i tried so many times.
Any Sujjestion pls...

Regards,
Hari

------
Get your email and more, right on the new Yahoo.com

hi, hari
Can you tell which 510 USB emulator are you using? (BlackHawk, Ateme etc)
What are the error message are you geting.

swapnali

hari wrote:
Hi guys,

Presently i am having DM642EVM Board with me.
I am having CCS2.2 and also i followed the steps they were present in the "dm642evm_QuickStartGuide".

After installing the patches and "SdConfig C6000 v2.2x" i am not getting the emulator to run.

After all installation i started with "Setup CCS 2", then i imported EVMDM642XDS510USB Emulator.

Then while starting the CCS2.2 it is showing the error that

" Can't Initialize Target CPU
I/O Port = 510
Board Name: DM642 EVM via XDS510-USB
Cpu Name:DSP_C64xx
..
.//...
.//.

"

i did as per the installation guide.
i tried so many times.

Any Sujjestion pls...

Regards,
Hari

---------------------------------
Heres a new way to find what you're looking for - Yahoo! Answers

Hi guys,

Presently i am having DM642EVM Board with me.
I am having CCS2.2 and also i followed the steps they were present in the "dm642evm_QuickStartGuide".

After installing the patches and "SdConfig C6000 v2.2x" i am not getting the emulator to run.
After all installation i started with "Setup CCS 2", then i imported EVMDM642XDS510USB Emulator.

Then while starting the CCS2.2 it is showing the error that

" Can't Initialize Target CPU
I/O Port = 510
Board Name: DM642 EVM via XDS510-USB
Cpu Name:DSP_C64xx
..
.//...
.//.

"

i did as per the installation guide.
i tried so many times.
Any Sujjestion pls...

Regards,
Hari