Hi, Janne.
I use the ADDS-21160M EzKitLite for what you call "real work", but
certainly not with Apex ICE, rather with MTN Ice on Win98 and I am
happy with it. Perhaps can't help too much, 'cause your problems seem
to be ICE-specific. You could contact ADI support, (if you haven't done
bofore) at d...@analog.com. A little bit delayed, but they help.
What I would like to know is how to implement a Parallel Port interface to
the Kit. I mean, I need to transfer the data I want to and from a host PC, but
it seems to be complicated because the monitor is using it with the CPLD. Have
you ever done something like this before? Any example?
Regards,
Jaime.
j...@artic.net wrote: Hi!
I am
using VisualDSP++ ver.3.0.1.0 with SP1, Apex-Ice emulator (firmware
ver.1.10.0) and Ez-kit Lite board with adsp21160 DSP on it. The debugger
is driving me crazy because it crashes all the time and there is no way to
kill debugger process, I have to restart the whole machine (Windows 2K).
Does anybody have same kind of trouble with debugger? Usually debugger
crashes when starting it from Environment. Sometimes it crashes just for
fun.
Also I had a problem when writing to external memory (starting
from 0x00800000). Debugger crashed every time I tried to access to external memory. Then I change boardID from 0 to 1 in Ez-kit, and now I
can write to external memory. BUT, when I am writing to even addresses in
external memory , it copies the same data to all even addresses and vice
versa when writing to odd addresses.
Does anybody know tricks for
this kind of problems or should I beat the shit out of Ez-kit board.
Does anybody know good links where are code examples for 21160 written in C?
Does anybody use Ez-kit Lite and Apex-ice emulator
for REAL development work (like I am trying to do) and are happy with it
???
Thank you, Janne _____________________________________ Note: If you do a simple "reply"
with your email client, only the author of this message will receive your
answer. You need to do a "reply all" if you want your answer to be distributed
to the entire group.
_____________________________________ About
this discussion group:
To Join: Send an email to
a...@yahoogroups.com
To Post: Send an email to
a...@yahoogroups.com
To Leave: Send an email to
a...@yahoogroups.com
Archives: http://groups.yahoo.com/group/adsp
Other Groups: http://www.dsprelated.com/groups.php3
Jaime Andr Aranguren Cardona j...@ieee.org jaime.arangure...@computer.org
|