ok, thanks ;-)
i can each pin dai_P[1..20] configure as input or output ? is this
correct?
and the answer is .... (yes, only yes maybe)
Reply by Al Clark●May 30, 20072007-05-30
daniel.bojara@web.de wrote in news:1180530947.723904.271830
@q66g2000hsg.googlegroups.com:
> Hi,
>
> can I use the DAI-PINS use for Input/Output. Example as an Flag? or an
> Interrupt Input?
>
> The ADSP-21364 has only 4 Flag I/O. But i need more. Is this possible?
>
> many thanks
>
Yes
--
Al Clark
Danville Signal Processing, Inc.
--------------------------------------------------------------------
Purveyors of Fine DSP Hardware and other Cool Stuff
Available at http://www.danvillesignal.com
Reply by ●May 30, 20072007-05-30
Hi,
can I use the DAI-PINS use for Input/Output. Example as an Flag? or an
Interrupt Input?
The ADSP-21364 has only 4 Flag I/O. But i need more. Is this possible?
many thanks