Again me,
Lets try another way. If i have JTAG FET for MSP430 uC family, can i use it
as interface only for Boundary Scan with TI's DSPs? Or any another JTAG.
I don't need Emulation i need only Boundary Scan.
Kris
Uzytkownik "Wolfgang" <never@nowhere.com> napisal w wiadomosci
news:c8ainl$c37$05$1@news.t-online.com...
> Hello Krzysztof,
>
> Excuse it was the answer to "What can i use instead of oryginal TI's
interface?"
>
> > I don't see there any schematics.
>
> You will not find there (if at all). I think it's a business secret. JTAG
is normed but not the part of it
> where you can gain control over the hole DSP. TI does not explain.
>
> Wolfgang
>
> > Any suggestions?
> >
> > Kris
> >
> >
> > Uzytkownik "Wolfgang" <never@nowhere.com> napisal w wiadomosci
> > news:c8aaqn$2lr$04$1@news.t-online.com...
> > > Dear Kris,
> > >
> > > www.blackhawk-dsp.com
> > >
> > > Good luck, Wolfgang
> > >
> > > "Krzysztof Gawryo" <profrook@o2.pl> schrieb im Newsbeitrag
> > news:c8a8km$sba$1@nemesis.news.tpi.pl...
> > > > Hi all,
> > > >
> > > > I'm looking for simple JTAG interface (schematic) for TI DSP's,
> > compatybile
> > > > with CCS.
> > > > What can i use instead of oryginal TI's interface?
> > > >
> > > > Kris
> > > >
> > > >
> >
> >
Reply by Wolfgang●May 17, 20042004-05-17
Hello Krzysztof,
Excuse it was the answer to "What can i use instead of oryginal TI's interface?"
> I don't see there any schematics.
You will not find there (if at all). I think it's a business secret. JTAG is normed but not the part of it
where you can gain control over the hole DSP. TI does not explain.
Wolfgang
> Any suggestions?
>
> Kris
>
>
> Uzytkownik "Wolfgang" <never@nowhere.com> napisal w wiadomosci
> news:c8aaqn$2lr$04$1@news.t-online.com...
> > Dear Kris,
> >
> > www.blackhawk-dsp.com
> >
> > Good luck, Wolfgang
> >
> > "Krzysztof Gawryo" <profrook@o2.pl> schrieb im Newsbeitrag
> news:c8a8km$sba$1@nemesis.news.tpi.pl...
> > > Hi all,
> > >
> > > I'm looking for simple JTAG interface (schematic) for TI DSP's,
> compatybile
> > > with CCS.
> > > What can i use instead of oryginal TI's interface?
> > >
> > > Kris
> > >
> > >
>
>
Reply by ●May 17, 20042004-05-17
Wolfgang,
I don't see there any schematics.
Any suggestions?
Kris
Uzytkownik "Wolfgang" <never@nowhere.com> napisal w wiadomosci
news:c8aaqn$2lr$04$1@news.t-online.com...
> Dear Kris,
>
> www.blackhawk-dsp.com
>
> Good luck, Wolfgang
>
> "Krzysztof Gawryo" <profrook@o2.pl> schrieb im Newsbeitrag
news:c8a8km$sba$1@nemesis.news.tpi.pl...
> > Hi all,
> >
> > I'm looking for simple JTAG interface (schematic) for TI DSP's,
compatybile
> > with CCS.
> > What can i use instead of oryginal TI's interface?
> >
> > Kris
> >
> >
Reply by Wolfgang●May 17, 20042004-05-17
Dear Kris,
www.blackhawk-dsp.com
Good luck, Wolfgang
"Krzysztof Gawryo" <profrook@o2.pl> schrieb im Newsbeitrag news:c8a8km$sba$1@nemesis.news.tpi.pl...
> Hi all,
>
> I'm looking for simple JTAG interface (schematic) for TI DSP's, compatybile
> with CCS.
> What can i use instead of oryginal TI's interface?
>
> Kris
>
>
Reply by ●May 17, 20042004-05-17
Hi all,
I'm looking for simple JTAG interface (schematic) for TI DSP's, compatybile
with CCS.
What can i use instead of oryginal TI's interface?
Kris