Reply by ●March 22, 20022002-03-22
you might see if JP2 is configured ok. -----Original Message-----
From: Joel Ironstone [mailto:]
Sent: Friday, March 22, 2002 3:29 AM
To:
Subject: Re: [c54x] Help: C5402 DSK initialization inconsistency Try to make sure your dip-switch settings are ok.

At 03:59 PM 21/03/2002 +0000, you wrote:
>_____________________________________
>Note: If you do a simple "reply" with your email client, only the author
>of this message will receive your answer. You need to do a "reply all" if
>you want your answer to be distributed to the entire group.
>
>_____________________________________
>About this discussion group:
>
>To Join: Send an email to
>
>To Post: Send an email to
>
>To Leave: Send an email to
>
>Archives: http://www.yahoogroups.com/group/c54x
>
>Other Groups: http://www.dsprelated.com >
>There is 1 message in this issue.
>
>Topics in this digest:
>
> 1. Help: C5402 DSK initialization inconsistency
> From: "commdsp" < >________________________________________________________________________
>________________________________________________________________________
>
>Message: 1
> Date: Thu, 21 Mar 2002 00:30:48 -0000
> From: "commdsp" <>
>Subject: Help: C5402 DSK initialization inconsistency
>
>Hi,
>
>I'm new to TI C5402 DSK. After resetting the parallel port
>successfully and setting up CCS 1.2 with parallel port for
>the board, I invoke the CCS application. Sometimes the emulator
>runs, but other times I get the error saying "can't initialize
>target DSP" on the same computer. Any quick hint as to
>what might be wrong?
>
>Thanks,
>
>Lin >
>
>________________________________________________________________________
>________________________________________________________________________ >
>">http://docs.yahoo.com/info/terms/
 _____________________________________
Note: If you do a simple "reply" with your email client, only the author of
this message will receive your answer. You need to do a "reply all" if you
want your answer to be distributed to the entire group.

_____________________________________
About this discussion group:

To Join: Send an email to

To Post: Send an email to

To Leave: Send an email to

Archives: http://www.yahoogroups.com/group/c54x

Other Groups: http://www.dsprelated.com ">http://docs.yahoo.com/info/terms/


Reply by Joel Ironstone ●March 21, 20022002-03-21
Try to make sure your dip-switch settings are ok.

At 03:59 PM 21/03/2002 +0000, you wrote:
>_____________________________________
>Note: If you do a simple "reply" with your email client, only the author
>of this message will receive your answer. You need to do a "reply all" if
>you want your answer to be distributed to the entire group.
>
>_____________________________________
>About this discussion group:
>
>To Join: Send an email to
>
>To Post: Send an email to
>
>To Leave: Send an email to
>
>Archives: http://www.yahoogroups.com/group/c54x
>
>Other Groups: http://www.dsprelated.com >
>There is 1 message in this issue.
>
>Topics in this digest:
>
> 1. Help: C5402 DSK initialization inconsistency
> From: "commdsp" < >________________________________________________________________________
>________________________________________________________________________
>
>Message: 1
> Date: Thu, 21 Mar 2002 00:30:48 -0000
> From: "commdsp" <>
>Subject: Help: C5402 DSK initialization inconsistency
>
>Hi,
>
>I'm new to TI C5402 DSK. After resetting the parallel port
>successfully and setting up CCS 1.2 with parallel port for
>the board, I invoke the CCS application. Sometimes the emulator
>runs, but other times I get the error saying "can't initialize
>target DSP" on the same computer. Any quick hint as to
>what might be wrong?
>
>Thanks,
>
>Lin >
>
>________________________________________________________________________
>________________________________________________________________________ >
>">http://docs.yahoo.com/info/terms/

Reply by commdsp ●March 21, 20022002-03-21
Hi,

I'm new to TI C5402 DSK. After resetting the parallel port
successfully and setting up CCS 1.2 with parallel port for
the board, I invoke the CCS application. Sometimes the emulator
runs, but other times I get the error saying "can't initialize
target DSP" on the same computer. Any quick hint as to
what might be wrong?

Thanks,

Lin