The debugger doesn't slow down the operation of the processor when
you are in the run mode. So the periods under this condition the period
should be accurate.
If you are doing things like single stepping, hit a break point, use
complex software breakpoints, or use the CodeWarrior standard IO features like
printing to the console or getting key board entry the operation of the
processor is halted to perform this features and hence real time functionality
is lost.
Does using the debugger slow down
execution speed of the program? I've programmed some interrupts to
occur periodically (timer int errupts) and would like to know, when running
under the the debugger, if the periods are accurate.
Thanks Joe
_____________________________________ Note: If you do a simple "reply" with your email client, only the author of
this message will receive your answer. You need to do a "reply all" if you
want your answer to be distributed to the entire group.
_____________________________________ About this discussion group:
To Join: m...@yahoogroups.com
To Post:
m...@yahoogroups.com
To Leave: m...@yahoogroups.com
Archives: http://www.yahoogroups.com/group/motoroladsp
More Groups:
http://www.dsprelated.com/groups.php3
">Yahoo! Terms
of Service.
|